Binder KBF 720 (E5.2) User Manual

Issue 02/2012 Art. N0. 7001-0207
Operating Manual
APT.line™ KBF (E5.2)
Climatic chamber for constant conditions with program control
Model
Art. No.
KBF 115 (E5.2)
9020-0139, 9120-0139
KBF 115-UL (E5.2)
9020-0184, 9120-0184
KBF 240 (E5.2)
9020-0150, 9120-0150
KBF 240-UL (E5.2)
9020-0176, 9120-0176
KBF 720 (E5.2)
9020-0108 9120-0108
KBF 720-UL (E5.2)
9020-0168, 9120-0168
APT.line™ KBF P (E5.2)
Climatic chamber for constant conditions with program control
with ICH compliant illumination and adjustable light cassettes
Model
Art. No.
KBF P 240 (E5.2)
9020-0160, 9120-0160
9020-0244, 9120-0244
KBF P 240-UL (E5.2)
9020-0106, 9120-0106
KBF P 720 (E5.2)
9020-0143, 9120-0143
9020-0246, 9120-0246
KBF P 720-UL (E5.2)
9020-0169, 9120-0169
BINDER GmbH
Address Post office box 102
D-78502 Tuttlingen
Tel. +49 7462 2005 0
Fax +49 7462 2005 100
Internet http://www.binder-world.com
E-mail info@binder-world.com
Service Hotline +49 7462 2005 555
Service Fax +49 7462 2005 93 555
Service E-Mail service@binder-world.com
Service Hotline USA +1 866 885 9794 or +1 631 224 4340
Service Hotline Spain +34 9492 677 23
Service Hotline Asia Pacific +852 39070500 or +852 39070503
Service Hotline Russia and CIS +7 495 98815 17

Binder KBF 720 (E5.2) Specifications

General

Volume	720 liters
Voltage	400 V
Max. Load	200 kg
Power Supply	400 V
Cooling Type	Mechanical
Temperature Range	-10 °C to 100 °C
Humidity Range	10% to 98% RH

Summary

1. SAFETY

1.2 Structure of the safety instructions

1.4 Type plate

1.5 General safety instructions on installing and operating the climatic chamber

Covers safe installation and operation practices for the climatic chamber.

2. UNIT DESCRIPTION

2.2 Lateral control panel, right side KBF / KBF P

2.3 Lateral control panel, left side (KBF P, option KBF)

2.4 Instrument panel for KBF / KBF P

Details the microprocessor program controller and its functions.

3. COMPLETENESS OF DELIVERY, TRANSPORTATION, STORAGE, AND INSTALLATION

3.1 Unpacking and checking delivery

3.2 Guidelines for safe lifting and transportation

Instructions for safely handling and moving the unit during transport.

3.4 Location of installation and ambient conditions

4. INSTALLATION AND CONNECTIONS

4.2 Wastewater connection

4.3 Freshwater supply

Information on connecting the freshwater supply and water quality requirements.

4.4 Electrical connection

Instructions for connecting the unit to the power supply.

4.5 Installation and connection of the light cassettes (KBF P)

5. START UP

5.1 Function overview of the MB1display program controller

Explains the functions and displays of the MB1 program controller.

5.2 Operating modes

Describes the different operating modes: Idle, Manual, and Program.

5.3 Performance after power failures

5.4 Turning on the unit

7. GRAPHIC REPRESENTATION OF THE HISTORICAL MEASUREMENT (CHART RECORDER FUNCTION)

7.1 Setting the storage rate

How to configure the data logging rate for historical measurements.

8. MANUAL MODE

8.1 Entering the set point values

Instructions for entering temperature and humidity set points in manual mode.

8.2 Entering the set point values for KBF P when operating without illumination

9. PROGRAM OPERATION

9.1 Menu-based program entry

Steps for creating programs using the controller's menu system.

9.2 Entry of temperature values and fan speed

How to input temperature and fan speed settings for program sections.

9.3 Entry of humidity values

How to input humidity values for program sections.

9.4 Selecting between “set-point ramp” and “set-point step”

9.5 Program entry as “set-point ramp” or as “set-point step”

9.6 Information on programming different temperature or humidity transitions

9.7 Repetition of a section or several sections within a program

9.8 Performance after power failure in Program Mode

9.9 Starting a previously entered program

10. TEMPERATURE SAFETY DEVICES

10.1 Over temperature protective device (class 1)

Description of the internal safety device that protects against defects.

10.2 Safety controller (temperature safety device class 3.1)

Details the independent temperature controller for material protection.

10.3 Temperature safety device class 3.3 (DIN 12880) (option)

Information on the optional over/under temperature protection device.

11. NOTIFICATION AND ALARM FUNCTIONS

11.1 Notification and alarm system overview (auto diagnosis system)

Overview of unit notifications, alarms, and error indications.

11.2 Resetting the notification or alarm messages

12. HUMIDITY SYSTEM

12.1 Function of the humidifying and dehumidifying system

Explains how the humidity generation and removal systems operate.

16. MAINTENANCE, CLEANING, AND SERVICE

16.1 Maintenance intervals, service

Guidelines and intervals for regular maintenance and service.

16.2 Replacement of the fluorescent tubes

16.3 Cleaning and decontamination

18. TROUBLESHOOTING

Heating

Common issues and solutions related to the unit's heating function.

Refrigerating performance

Troubleshooting steps for low or no cooling performance.

Humidity

Solutions for humidity control issues and accuracy problems.

Controller

Troubleshooting common problems with the unit's controller.

19. TECHNICAL DESCRIPTION

19.1 Factory calibration and adjustment

19.4.1 KBF technical data

Detailed specifications for KBF models.

19.4.2 KBF P technical data

Detailed specifications for KBF P models.

19.5 Equipment and options

19.6 Spare parts and accessories

19.7 Dimensions KBF 115

19.8 Dimensions KBF 240 / KBF P 240

19.9 Dimensions KBF 720 / KBF P 720