Binder FP 720 - Page 91

91 pages

Save Page as PDF

To Previous Page

To Previous Page

Loading...

Table of Contents

Default Chapter2
- Table of Contents2
1 Safety4
- Legal Considerations4
- Structure of the Safety Instructions4
- Localization / Position of Safety Labels on the Chamber6
- Type Plate7
- General Safety Instructions on Installing and Operating the Chambers8
- Intended Use10
2 Chamber Description11
- Chamber Overview12
- Control Panel13
3 Scope of Delivery, Transportation, Storage, and Installation13
- Unpacking, and Checking Equipment and Scope of Delivery13
- Guidelines for Safe Lifting and Transportation14
- Storage14
- Location of Installation and Ambient Conditions15
4 Installation of the Equipment16
- Electrical Connection16
- Connection to a Suction Plant (Optional)16
5 Start up17
- Air Change17
- Settings at the RD3 Program Controller17
- General Indications18
6 Fixed Value Entry Mode20
7 Week Program Editor21
- Program Table Template for Week Program Editor24
8 Program Editor25
- Selecting between Set-Point Ramp and Set-Point Step25
- Set-Point Entry for Program Operation28
- Program Table Template32
- Deleting a Program Section33
9 Program Start Level34
10 User Level36
11 Example Programming for the Week Program Editor43
- Desired Time Function43
- Proceeding Overview43
- Proceeding in Detail43
12 Example Programming for the Program Editor49
- Desired Time Function49
- Proceeding Overview49
- Proceeding in Detail50
13 Behavior at Failures56
- Behavior after Power Failure56
- Alarm Messages56
14 Temperature Safety Devices56
- Temperature Safety Device Class 2 (DIN 12880)56
- Temperature Safety Device Class 3.1 (DIN 12880) (Option)57
15 Options59
- Communication Software APT-COM™ 3 Datacontrolsystem (Option)59
- Data Logger Kit (Option)59
- Additional Measuring Channel for Digital Object Temperature Indicator with Flexible Temperature Sensor Pt 100 (Option)59
- Analog Output for Temperature (Option)60
- Zero-Voltage Relay Outputs Via Operation Lines (Option)60
- HEPA Fresh Air Filter (Option)60
- Mostly Gas-Tight Version (Option for FP 53 and FP 115)61
- Inert Gas Connection with Mostly Gas-Tight Version (Option for FP 53 and FP 115)61
16 Maintenance, Cleaning, and Service63
- Maintenance Intervals, Service63
- Cleaning and Decontamination64
  - Cleaning64
  - Decontamination65
- Sending Back the Chamber to BINDER Gmbh66
17 Disposal67
- Disposal of the Transport Packing67
- Decommissioning67
- Disposal of the Chamber in the Federal Republic of Germany68
- Disposal of the Chamber in the Member States of the EC Except for the Federal Republic of Germany69
- Disposal of the Chamber in Non-Member States of the EC70
18 Troubleshooting71
19 Technical Description72
- Factory Calibration and Adjustment72
- Over Current Protection72
- Definition of Usable Space72
- Technical Data73
- Equipment and Options (Extract)74
- Accessories and Spare Parts (Extract)76
- Dimensions FP 5377
- Dimensions FP 11578
- Dimensions FP 24079
- Dimensions FP 40080
- Dimensions FP 72081
20 Eu Declaration of Conformity82
21 Product Registration84
22 Contamination Clearance Certificate85
- For Chambers Located Outside USA and Canada85
- For Chambers in USA and Canada88

Related product manuals

Preview: Binder FP 53