Binks TROPHY 2466 SERIES - Page 7

EN
77-3027-R1.0 7 / 16
CHART 7: CONVENTIONAL AIR CAP AND FLUID NOZZLE SELECTION CHART
Air Cap
Air Cap
Part No.
Spray Pattern
Range
CFM
@
30 PSI
CFM
@
50 PSI
CFM
@
70 PSI
Fluid Nozzle Typical Coatings
12-C 46-6501 4 – 12" 8.3 12.1 14.2
45-11050 series,
1.2 mm – 1.8 mm
Lacquers, Enamels, Top Coats,
Low Viscosity Adhesives
CHART 8: LVMP – LOW VOLUME MEDIUM PRESSURE AIR CAP AND FLUID NOZZLE SELECTION CHART
Air Cap
Air Cap
Part No.
Spray Pattern
Range
CFM @30 PSI Gun Inlet
(Dynamic)
Fluid Nozzle Typical Coatings
23-L 46-6511 4 – 12" 10.6
45-11050 series,
1.2 mm – 1.8 mm
Lacquers, Enamels, Top Coats,
Low Viscosity Adhesives
CHART 9: HVLP – HIGH VOLUME LOW PRESSURE AIR CAP AND FLUID NOZZLE SELECTION CHART
Air Cap
Air Cap
Part No.
Spray Pattern
Range
SCFM @
10 PSI Cap
Pressure
(Dynamic)
Gun Inlet
PSI @ 10 PSI
at Air Cap
(Dynamic)
Fluid Nozzle Typical Coatings
32-H 46-6518 8 – 14" 15.5 26
45-11050 series,
1.2 mm – 1.8 mm
Lacquers, Enamels, Multi-Colors,
Multi-Spec, Nonstick Coatings,
Cut-Latex
CHART 10: ROUND SPRAY AIR CAP AND FLUID NOZZLE SELECTION CHART (OPTIONAL)
Air Cap
Air Cap
Part No.
Spray Pattern
Range
CFM
@
30 PSI
CFM
@
50 PSI
CFM
@
70 PSI
Fluid Nozzle Typical Coatings
16 46-6505 2 – 4" 5.6 7.8 10.5
45-11050 series,
1.2 mm – 1.8 mm
Lacquers, Enamels
BINKS “TROPHY” SERIES GRAVITY SPRAY GUN
AIR CAP AND FLUID NOZZLE SELECTION CHARTS