BIO RAD MyCycler - 1.2 Features; 1.3 System Setup; 1.3.1 Unpacking

Handl
Keypad
<"■>
LCD Display
/—N
1.2 Features
• Self-adjusting lid and reaction module design accommodate 0.2 ml tubes,
strips, and 96-well plates.
• Graphical representation of thermal cycling protocols.
• User-friendly software, including menu driven software, ready-made protocol
templates and user-defined preferences.
• Run status and history are recorded in run reports and validation reports.
Optional sleep mode saves power when the instrument is not in use.
• USB port enables users to transfer and print protocols or reports with a host
computer connected to the instrument and a printer.
Compact design saves bench space.
• Temperature monitoring and control can be specified by instrument algorithm
or reaction module block mode.
• NIST-traceable temperature performance.
1.3 System Setup
1.3.1 Unpacking
The MyCycler is shipped in one box containing the following:
• MyCycler thermal cycler
• Power cord
• Instruction Manual
Fuses
• USB cable for PC interface
• MyCycler utility CD-ROM
^