Page 10 / 41 IFU_MAL_EN_V6
NOTES:
- After opening, keep all the original packaging for future use (in case of return or transport of
the device). The device must always be transported in its original packaging, which has been
specially designed to protect it from damage.
- Check whether the packaging is damaged. If damage is found, the device may also have
been damaged. Please contact your distributor.
STEP 2 – Remove from the box: the base, the button and the accessories
You can get Mallya free support @ my-mallya.com
5.2 CHARGING AND CALIBRATING YOUR MALLYA
5.2.1 CHARGING YOUR MALLYA
NOTE:
Mallya must be charged before first-time use.
CAUTION
- Mallya
is supplied with a USB cable. Do not use any other cable. Use the cable supplied
with the device to connect it to a USB power port.
- Never use your Mallya for an injection while it is connected to a USB power port and
charging.
Plug the powered USB cable into
the Mallya micro-USB port.
Check that the Mallya LED is
slowly flashing green.
Let the battery charge for at least
10 minutes.
NOTES:
Fully recharging the battery takes approximately 2 hours. When the battery is fully charged,
the green LED will turn off. You can then unplug the USB power cable.
Optimal autonomy is reached when Mallya’s battery is fully charged. You can then use
Mallya for at least 2 weeks.
To Next Page
Loading...
