BIOCORP Mallya - Warnings and Cautions

Page 5 / 41 IFU_MAL_EN_V6
SYMBOL
LOCATION
DESCRIPTION
DEVICE AND PACKAGING Product reference
PACKAGING Distributor reference
PACKAGING Class II device (double isolation)
-)
PACKAGING Type BF applied part
PACKAGING
Protection index IP22 (see section
10.4.: maintain water, dust and
light resistance)
PACKAGING For indoor use only
PACKAGING Moisture sensitive device
PACKAGING
Temperature limits to which the
device can be safely exposed.
PACKAGING
Humidity limits to which the device
can be safely exposed.
PACKAGING
Pressure limits to which the device
can be safely exposed.
PACKAGING
Management of electrical and
electronic waste.
Table 8 - Symbols on the device and its packaging (next)
4.2 WARNINGS AND CAUTIONS
NOTES:
- Mallya must only be used for the intended use described in this manual.
- Read these instructions before you use Mallya for the first time. Keep these instructions
in a safe place.
- The device must be used in the specified ambient conditions (do not expose the device
to temperatures above 40°C (104°F) or flames).
- If the device experiences an external mechanical impact (knocking, bumping, dropping,
etc.), this may cause malfunctioning of the device. In case of malfunctioning, please contact
a BIOCORP PRODUCTION authorized dealer for technical support.
- Never install a mobile application from unofficial stores on your phone.
- Using a phone of unknown origin causes risk and will invalidate the Mallya warranty.
- Protect your personal health data by using a password on your smartphone.
- Periodic maintenance of Mallya is not required, only daily inspection is recommended.
Maintenance of the Mallya
is required when the device does not pass its functional testing.
If the functional testing is not successful, you are prompted to contact a BIOCORP
PRODUCTION authorized dealer.