biodex BALANCE SYSTEM SD - Change Access ID Code; To Add an Age Range; To Adjust the CTSIB Age Range

)
@5;FDEE96)(86'2?86
1. At the Configuration Screen, touch < m-CTSIB Defaults>. The m-CTSIB Defaults screen will
now be displayed.
2. Select <Age Range>.
3. Select the Age Range you would like to adjust. The From and To values in the range will
appear on the screen.
4. Select the value you would like to adjust. Adjust the value using the < ▲> or < ▼> arrows or
the key pad displayed.
5. Press <OK> to save the adjustment(s) and return to the m-CTSIB Age Range screen.
6. Press <OK> from the m-CTSIB Age Range screen to return to the m-CTSIB Defaults screen.
)@552?86'2?86
1. At the Configuration Screen, touch < m-CTSIB Defaults>. The m-CTSIB Defaults screen will
now be displayed.
2. Select <Age Range>.
3. Select the <Add> Age Range button at the bottom of the screen.
4. A new Age Range screen will appear. The From and To values in the range will also appear
on the screen.
5. Select the value you would like to set. Adjust the value using the < ▲> or < ▼> arrows or the
key pad displayed.
6. Press <OK> to save the new age range and return to the m-CTSIB Age Range screen.
7. Press <OK> from the m-CTSIB Age Range screen to return to the m-CTSIB Defaults screen.
#(($
At the Default Settings screen, users can change the Access Code used to access the Default
Settings screen.
)@92?86E96446DD@56
1. At the Configuration Screen, touch <Change Access ID Code>.
2. Select your New Access ID Code by entering the value using the < ▲> or < ▼> arrows or the
key pad displayed.
3. Press <OK> to save the New Access ID Code and return to the Default Settings screen.
17. BIBLIOGRAPHY
— 11-5 — SYSTEM UTILITIES