This equipment complies with the European rules for EMC
according to the safety standard IEC 60601-1-2. This device
complies with EMC rules under test conditions that include use
of system cables and connectors between system components.
This Equipment requires special precaution regarding the EMC
and must be installed and put into service according to the
information provided in this manual.
The use of accessories and cables other than those specified and
sold by the manufacturer may result in increased emissions or
decreased immunity of the equipment and may cause the system
to be non-compliant with the requirements of IEC 60601-1-2
Replace cables and connectors between components only with
Meditech approved cables and connectors.
This system may cause radio interference or may disrupt the
operation of nearby equipment. It may be necessary to take
mitigation measures, such as reorienting or relocating the
equipment or shielding the location.
To Next Page
Loading...