BIOFLEX Therapist - Warnings for Using the Treatment Arrays:; LD-Series; Body Switch and Indicator

39
Warnings for Using the Treatment Arrays:
• Do not twist
• Do not hyperextend
• Do not drop
• Do not tamper with diodes
Note: The Treatment Arrays must be secured to
allow air circulation around the top of the head. Do
not cover the heads while running treatments,
however you can use the Meditech approved
weight set.
LD-Series
Body Switch and Indicator
The LD-Series Treatment Heads are activated when the nosecone
tip contacts the skin. After selecting a treatment or continuing
to the next phase, wait until the indicators on the Treatment
Head turn green before applying the Head. Once the indicators
are green, apply the Treatment Head tip to the treatment area
and the treatment will begin (the indicators will turn amber).
Removal from the skin will cease treatment and the indicators
will return to green.
NOTE: When applying the Treatment Head, it is
important to ensure that the flat end makes full
contact with the skin.
Failure to do so might
expose bystanders to potentially dangerous laser
radiation. Refer to the pictures below for the
correct and incorrect application of the Treatment
Head.
A Treatment sleeve MUST always be used for
broken or compromised skin.
39