55
Calibration
• Calibration of the system and/or its components can only
be performed at Meditech or at an authorized service
center.
• If any LD-Series Treatment Head indicates repeat
errors, it may need calibration.
• To maintain your arrays and to keep them working at
optimal performance, they should be calibrated
periodically, depending on use.
• The Controller Unit (CU) does not require calibration.
Note: Only Meditech authorized service personnel are able
to calibrate the system properly. Unauthorized changes
to the system may be subject to termination of the warranty
at Meditech’s discretion.
To Next Page
Loading...