56
Cleaning
• The CU may be cleaned using a damped soft cloth
or a soft disinfectant cloth.
• The arrays may be cleaned with alcohol wipes, a soft
disinfectant cloth, a soft damp cloth and/or alcohol/
cotton swab combinations.
• A soft bristle brush can be used to remove particles
from the LS Series Treatment Array.
• The LD Series Treatment heads may be cleaned with
alcohol wipes a soft disinfectant cloth, a soft damp
cloth and/or alcohol / cotton swab combinations.
• It is recommended that the treatment surface of the
Treatment Arrays be cleaned after each treatment.
• To keep the Treatment Arrays clean from
contaminates from open wounds, etc., use a clear
plastic bag (or plastic wrap) to prevent Treatment
Array contact with the disease area. Treatment
Array Sleeves (covers) can be purchased from
Meditech or a Meditech authorized distributor.
To Next Page
Loading...