57
If the System Becomes Damaged
If part or all of the system is dropped or damaged, check to
determine if it still functions properly. To troubleshoot a system,
perform the following steps:
1. Check all power connections. Make sure all cables are secure
and properly connected.
2. Turn on the CU. If the CU does not work, contact a Meditech
authorized service center for technical assistance.
Liquids from spills or excessive humidity can also damage your
system. If the system becomes wet, perform the following
steps:
1. Immediately unplug all system components from the electrical
outlet.
2. Contact a Meditech authorized service center for assistance.
To Next Page
Loading...