The following safety guidelines protect your system from potential
damage and ensure personal safety:
• The system can be used in any location in the world which
provides the following AC power ratings:
1. 115 volts (V)/60 hertz (Hz) in most of North and South
America and some Far Eastern countries such as Korea
and Taiwan using the MPU30A-1-1 AC adapter, or
2. 100V/50Hz in eastern Japan and 100V/60Hz in
Western Japan using the MPU30A-1-1 AC adapter, or
3. 230V/50Hz in most of Europe, the Middle East, and
the Far East using the MPU30A-1-1 AC adapter.
• AC adapters are available by contacting Meditech or your
local distributor.
• To help prevent electric shock, plug the Controller Unit (CU)
into properly grounded power sources. For best grounding,
plug into a receptacle marked “Hospital Grade.”
• Using extension cords with the system might affect its
performance
• All system cables should be periodically inspected for signs
of deterioration. If damaged, contact Meditech’s authorized
service centers to repair or replace the cable(s).
• Do not pull, kink or pinch the cables. All cables should be
loosely wound in a loop and they should never be tightly
wrapped around the Treatment Array.
• Never remove the ground pin of the AC power cord.
To Next Page
Loading...