59
Error Messages
An error message will be displayed on the CU’s screen whenever
there is a problem with the system. All Treatment Heads are
automatically tested prior to each use.
• Should a fault occur within the Treatment Head, the user will be
informed with a “beep” and a message via the LCD.
• In some cases the operator may proceed with discretion.
• If your system requires service, please contact a Meditech
authorized service center.
Error Messages
An error message will be displayed on the CU’s screen whenever
there is a problem with the system. All Treatment Heads are
automatically tested prior to each use.
• Should a fault occur within the Treatment Head, the user will be
informed with a “beep” and a message via the LCD.
• In some cases the operator may proceed with discretion.
• If your system requires service, please contact a Meditech
authorized service center.
To Next Page
Loading...