58
Guidelines for Proper Packaging
In order to ship the system, please follow the guidelines
below for proper packaging:
• Use the original packaging that your system arrived in.
• OR use a box with sufficient room for adequate
cushioning material for all sides of the container.
Never exceed the maximum gross weight for the box
(which is usually printed on the bottom lap).
• Properly cushion the contents of your package by wrapping
each item separately. To prevent damage to the
contents, ensure that they are separated from the corners
and sides of the box. Various materials can be used for
cushioning and protection: i.e. air-encapsulated plastic
(bubble wrap), foam-in-place and/or corrugated dividers.
Use enough cushioning material to ensure that the
contents won’t move easily if the box is handled
improperly.
• Make sure to properly close the box. For best results,
use either pressure-sensitive plastic or water
activated paper tape with at least two inches (5cm) width.
Do not use masking tape, cellophane tape, string or paper
to seal the box.
To Next Page
Loading...