BIOFLEX Therapist - Controller Unit (CU); Screen; POWER; LASER STOP; SELECT and EXIT

30
To help prevent electric shock, plug the Controller Unit (CU) into
properly grounded power sources. For best grounding, plug into
a
receptacle marked “Hospital Grade.”
Screen
A back-lit liquid crystal display (LCD) provides the user with
information and instructions.
POWER / LASER STOP
• The system is turned on and off by using the POWER / LASER
STOP button on the front of the CU.
• Press once to turn on the system.
• Press POWER / LASER STOP for approximately 1 second to
shut off the system.
• Pressing POWER / LASER STOP during treatment will
immediately stop the treatment and the emission of light.
SELECT and EXIT
Follow the instructions on the bottom of the CU’s screen for when
to use SELECT and EXIT.
UP and DOWN
(Unlabeled Arrow Buttons)
Generally, UP and DOWN allow scrolling through menu items or
selecting values on the CU’s screen. Follow the instructions on
the bottom of the CU’s screen how to use the UP and DOWN
buttons.
30