BIOFLEX Therapist - Page 63

62
MESSAGES VIA
LCD
POSSIBLE
CAUSE
SOLUTION
Head error
Refer to error code
### in manual
Error codes: L01,
D01, D02, D03, L02,
L03, L04, L09
Treatment Head
may need calibration
or is malfunctioning.
Stop treating with the
Treatment Head.
Contact a Meditech
authorized service center
for further assistance.
Provide error code to the
service center.
Send Treatment Head in
for service.
Head warning
Refer to warning
code ### in manual
Warning codes: L05
Treatment Head
may need calibration
or is malfunctioning.
You may continue
treating with the
Treatment Head
If the problem persists
contact a Meditech
authorized service center
for further assistance.
Provide warning code to
the service center.
System failure
Refer to error code
### in manual
Controller Unit (CU)
or Treatment Head
may need calibration
or is malfunctioning.
Stop treating with the
system.
Contact a Meditech
authorized service center
for further assistance.
Provide error code to the
service center.
Send system in for
service.
Unit failure
Refer to error code
### in manual
Error codes: E01,
E02, E03, E10, E11
and E12
Controller Unit (CU)
is malfunctioning.
Stop treating with the
system.
Contact a Meditech
authorized service center
for further assistance.
Provide error code to the
service center.
Send CU in for service.