Chapter 1. General Information
1) Product Overview
FC-700 is the fetal monitor that measures the fetal heart rate and uterine contraction. FC-700
irradiates ultrasound wave to the abdomen of a pregnant woman, and detects the Doppler
frequency signal reflected from the heart of the fetus. FC-700 analyzes this signal and displays
the heart rate by LED. Also, FC-700 provides the sound from the heart of fetus.
FC-700 measures the uterine contraction of a pregnant woman by pressure sensors and
displays the numerical values.
And FC-700 records the heart rate of the fetus, fetal movement and the values of uterine
contraction.
Intended use
FC-700 is the fetal monitor that measures, displays numerical value of measured results by LED,
prints graphically the fetal heart rate and uterine contraction of a pregnant woman, and also
provides the sound from the heart of fetus. It is intended to aid comprehensive assessment for
the will being of single fetus.
It intended to be used by trained healthcare personnel. It is not intended for home use.
2) Product Features
- FC-700 records the heart rate of the fetus, fetal movement and the uterine contraction of a
pregnant woman, and basic information of the equipment with wide A4 Size paper.
- FC-700 can use general fax paper as well as thermal paper for fetal monitor.
- FC-700 has automatic NST function which records FHR, UC and fetal movement only for the
established time.
3) Product Configuration
FC-700 system consists of the following. Unpack the package and check the followings are
included. Also, be sure to check any damage to the main body and accessories.
① FC-700 main body
② Ultrasound Doppler Probe (1 EA)
③ UC Probe (1EA)
④ Event Mark Jack (1EA)
⑤ Print Paper (1EA)
⑥ Power Adaptor (1EA)
⑦ Power Cord (1EA)
⑧ Ultrasound Gel (1EA)
⑨ Probe Belt (2EA)
⑩ Operation Manual (1EA)
To Next Page
Loading...