24
Stage 2) Setting – Year
In 2nd stage, you set the Year in Date & Time setting.
1. After setting Beep, the display for setting Date & Time will appear. Set the correct
year by pressing
ೞ
or
button and then select the correct year by pressing the
Enter button.
Stage 3) Setting – Date Format
In 3rd stage, you set the Date Format in Date & Time setting.
1. Next, the display for setting date format will appear. The analyzer can display the
month and day in either Month-Day (m-d) format or Day-Month (d-m) format. Set
the preferred format on the display by pressing either
ೞ
or
button and select by
pressing the Enter button.
To Next Page