25
Stage 4) Setting – Date
In 4th stage, you set the Date in Date & Time setting.
1. After setting Date Format, set the correct month or day on the display by pressing
either
ೞ
or
button and select by pressing the Enter button.
Stage 5) Setting – Time Format
In 5th stage, you set the Time Format in Date & Time setting.
1. Next, the display for setting the time format will appear. The analyzer can display the
time in either 12h format or 24h format. Set the preferred format on the display by
pressing either
ೞ
or
button and select by pressing the Enter button.
To Next Page