Name: Biostar A520MH 3.0
Brand: Biostar
Rating: 4 (1 reviews)

To Next Page

To Previous Page

10 | Chapter 2: Hardware installaon

<TypeB>

Step 1: Remove the heatsink and fan assembly bracket on the motherboard and keep the

cooler backplane under the motherboard.

Step 2: Place the heatsink and fan assembly on top of the installed CPU and make sure that the

fan cable is closest to the CPU fan connector. Please refer diagram to the following screw into

the screw hole in the order shown.

Note

Do not forget to connect the CPU fan connector.

For proper installaon, please kindly refer to the installaon manual of your CPU heatsink.

Questions and Answers:

Need help?

Do you have a question about the Biostar A520MH 3.0 and is the answer not in the manual?

Biostar A520MH 3.0 Specifications

General