Biostar BIB75-M2T - Page 42

User’s Manual
40
Primary Display
This item selects which of IGFX/PEG/PCI Graphics device should be Primary
Display or select SG for Switchable Gfx.
Options: Auto (Default) / IGFX / PEG / PCI
Internal Graphics
This item keeps IGD enabled based on the setup options.
Options: Auto (Default) / Disabled / Enabled
GTT Size
This item select GTT Size.
Options: 2MB (Default) / 1MB
Aperture Size
This item select Aperature Size.
Options: 256MB (Default) / 128MB / 512MB
DVMT Pre-Allocated
This item select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by
the Internal Graphics Device.
Options: 64M (Default) / 32M / 96M / 128M / 160M / 192M / 224M / 256M
/ 288M / 320M / 352M / 384M / 416M / 448M / 480M / 512M / 1024M
DVMT Total Gfx Mem
This item select DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Options: 256MB (Default) / 128MB / MAX
Gfx Low Power Mode
This option is applicable for SFF only
Options: Enabled (Default) / Disabled
Graphics Performance Analyzers
This item is enables/ disables Intel graphics performance analyzers counters.
Options: Disabled (Default) / Enabled