G41D3+/G41D3G+ BIOS Manual
15
USB Device Wakeup from S3/S4
This item allo ws you to enable o r disabled the USB resume from S3/S4 function.
Options: Disabled (Default) / Enabled
High Perfor mance Event Timer
This item allows you to enable or disabled the HPET.
Options: Disabled (Default) / Enabled
HPET Memory Address
This item allows you to set the memory address of HPET.
Options: FED00000h (Default) / FED01000h / FED02000h / FED03000h
Resume On Ring
This item allows you to control the wake on ring function.
Options: Disabled (Default) / Enabled
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state. For this functio n to work, you may need a LAN add -on card which s upports
the W ake on LAN functio n. Set the Wake o n LAN (WOL) jumper on mo therboard
to enable if applic able.
Options: Disabled (Default) / Enabled
Resume On RTC Alarm
When “Enabled”, you can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
Options: Disabled (Default) / Enabled
RTC Alarm Date (Days )
You can choose which date the system will boot up.
RTC Alarm Time
You can c hoose the system boot up time, inp ut ho ur, minute and second to specify.