G41D3+/G41D3G+ BIOS Manual
25
North Bridge Configuration
BIOS SETUP UTILITY
Chipset
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
North Bridge Chipset Configuration
PEG Port Configuration
Memory Hole [Disabled]
Initiate Graphic Adapter [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
PEG Port [Auto]
> Video Function Configuration
Memory Remap Feature [Enabled]
PCI MMIO Allocation:
IGD GTT Graphics memory size [No VT mode, 2MB]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Memory Remap Feature
This item allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Only 64-bit OS supports this function.
Options: Enabled (Default) / Disabled
Memory Hole
You can reserve this area of sys tem memory for ISA adapter ROM. W hen this area
is res erved it c annot be cached. Check the user information of perip herals that need
to use this area of s ystem memory for the memory requirements.
Options: Disabled (Default) / 15MB – 16MB
Initiate Graphic Adapter
This item allows you to enable or disable VGA controller.
Options: PEG/PCI (Default) / IGD / PCI/IGD / PCI/PEG / PEG/IGD
IGD Graphics Mode Select
This item will be different as your memory modules. When the memory size is
decided, this frame buffer size will also be fixed.
Options: Enabled,32MB (Default) / Enabled,64MB / Enabled,128MB / Disabled
To Next Page
Loading...
Need help?
General
Weight and Dimensions
