To Next PageTo Next PageHow to troubleshoot a Biostar MCP6PB M2+ with no power?
If your Biostar Motherboard system has no power, with the Power LED off and the power supply fan not working, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable.
What to do if Biostar Motherboard won't boot after installing a second hard drive?
If your Biostar Motherboard fails to boot after installing a second hard drive, set the master/slave jumpers correctly. Also, run the SETUP program and select the correct drive types.
What to do if Biostar MCP6PB M2+ Motherboard is inoperative but keyboard lights are on?
If your Biostar Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM until the module snaps into place, applying even pressure.
How to fix 'Invalid Configuration' error on Biostar Motherboard?
If your Biostar Motherboard screen displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.
General| Number of memory slots | 2 |
|---|---|
| Maximum internal memory | 4 GB |
| Supported memory clock speeds | 533, 667, 800 MHz |
| Processor socket | Socket AM2 |
| Processor manufacturer | AMD |
| Power fan connector | Yes |
| Number of Parallel ATA connectors | 1 |
| USB 2.0 ports quantity | 4 |
| Firewire (IEEE 1394) ports | 0 |
| Audio chip | Realtek ALC662 |
| Certification | RoHS |
| Power source type | ATX |
| Audio output channels | 5.1 channels |
| Motherboard form factor | micro ATX |
| Compatible operating systems | Windows XP/Vista |
| Maximum graphics card memory | 512 MB |
| Parallel processing technology support | Not supported |
| LAN controller | Realtek RTL8201CL |
| Networking features | Fast Ethernet |
| BIOS type | - |
Weight and Dimensions| Depth | 170 mm |
|---|---|
| Width | 235 mm |
Step-by-step guide on how to properly install the CPU into the motherboard socket.
Details the physical installation process for memory modules onto the motherboard.
Illustrates how to correctly set up jumpers by placing or removing the jumper cap on pins.
Provides detailed pin assignments and functions for the Front Panel Header (JPANEL1).
Explains the striping mechanism of RAID 0, including features, benefits, and drawbacks.
