Biostar P4M890-M7 TE Setup Manual

Motherboard Manual
10
2.3 INSTALLING SYSTEM MEMORY
A. Memory Modules
DIMM1 DIMM2
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket
Location
DDR Module
Total Memory
Size
DIMM1 256MB/512MB/1GB/2GB
Max is 4GB.
DIMM2 256MB/512MB/1GB/2GB

Biostar P4M890-M7 TE Specifications

General

Brand	Biostar
Model	P4M890-M7 TE
Category	Motherboard
Language	English