Need help?Do you have a question about the birddog PF120 and is the answer not in the manual?
Legal notice regarding product usage, updates, and disclaimers.
Explains Network Device Interface (NDI) and its benefits for video creation.
Describes the BirdDog PF120 camera and its NDI A/V transfer protocol.
General warnings for safe installation, operation, and handling of the camera.
Guidelines for cleaning and maintaining the camera's front glass surface.
Compliance information related to FCC Part 15 regulations for digital devices.
Compliance with European Low Voltage and EMC Directives.
Details on how to power the BirdDog PF120 camera using PoE.
Details on how to power the BirdDog PF120 camera using DC.
Describes the initial boot process and power light indication.
Illustrates various connection types for camera operation.
Instructions for obtaining video via HDMI connection.
Steps to stream video via NDI and IP.
Information on USB 2.0 video output.
Explains controlling the camera via RS-232 and VISCA.
Details controlling the camera via IP using VISCA or PELCO protocols.
Describes camera control methods using NDI.
Using VISCA protocol over IP for camera control.
Details the communication interface, protocol, and port for VISCA over IP.
Instructions for setting static IP, subnet mask, and gateway.
Steps to connect and configure the controller for VISCA over IP.
Overview of the web interface for settings adjustments.
How to access the BirdDog Dashboard using a URL.
Steps to access the camera using its IP address via DHCP.
Configuration section for NDI AV settings.
Managing NDI video bitrate for quality and bandwidth.
Controls for fine-tuning individual color performance.
Section for enhancing color properties.
Section for enhancing overall image quality.
How to adjust the intensity of individual colors.
How to name the camera for network identification.
Configuring DHCP or static IP addresses.
Steps to set a static IP address for the camera.
Saving and recalling presets using the Web Dashboard.
Adjusting the maximum speed of the zoom movement.
Controlling On-Screen Display (OSD) for camera settings.
Selecting between TCP, UDP, Multicast, or MultiTCP for NDI transmission.
Explanations of different NDI transport methods.
How to navigate and use the camera's on-screen menus.
Navigating the main menu structure.
Accessing and adjusting specific setting menus.
Selecting between Full Auto, Manual, Iris Priority, and Shutter Priority modes.
Adjusting gain, gain limit, and high sensitivity settings.
Selecting modes like Auto, Indoor, Outdoor, or One Push.
How to perform and use the one-push white balance adjustment.
Adjusting sharpness, noise reduction, WDR, saturation, hue, contrast, gamma, deflicker.
Applying picture effects like Black & White.
Flipping and mirroring the image for mounting or orientation.
Adjusting gain for Magenta, Red, Yellow, Green, Cyan, Blue colors.
Adjusting hue for Magenta, Red, Yellow, Green, Cyan, Blue colors.
Enabling digital zoom and displaying the zoom ratio on screen.
Adjusting manual focus speed and preset movement speed.
PELCO ID, presets, factory reset, autofocus, and format selection.
Setting the RS232 baudrate for serial communication.
Changing the video output format for the camera.
Step-by-step guide for updating the MCU firmware.
Step-by-step guide for updating the NDI firmware.
Using Studio Monitor and TriCaster to receive NDI streams.
General| Brand | birddog |
|---|---|
| Model | PF120 |
| Category | Digital Camera |
| Language | English |
To Next Page
