Quick Start Usage Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
CROSSWAVE
™
QUICK START GUIDE
1785, 1713 SERIES
160-8628 Rev 12/15
1. First, insert the handle at
the top of the body of the
machine until you hear a
click.
2. For small area cleaning
(<300 sq ft), fill the clean
water tank with hand
hot tap water to the
first water fill line. Then
add formula to the first
formula fill line.
For large area cleaning
(up to 600 sq ft), fill the
clean water tank with
hand hot tap water to
the second water fill line.
Then add formula until
you get to the second
formula fill line. Screw the
cap back onto the clean
water tank.
3. On the back of the
machine, align clean water
tank with the grooves and
slide tank into place until
you hear a click.
4. Turn machine on by
selecting the type of floor
you will be cleaning. For
hard floors, choose the
HARD FLOOR button and
for area rugs choose the
RUG button.
5. Each time you use
the product, hold the
solution trigger for 10
seconds to prime the
system with cleaning
solution before you begin
cleaning. When you pull
the trigger, LED lights will
illuminate.
When solution is flowing,
you will see bubbles
forming at the edges of
the brush roll window.
click
2ND WATER
FILL LINE
2ND FORMULA
FILL LINE
HARD FLOOR
BUTTON
RUG
BUTTON
To Next Page
Need help?
General
