How to fix 'The text is XXX characters too long ! The text was not saved !' error on Bizerba SC II 400?
If your Bizerba Scales display 'The text is XXX characters too long ! The text was not saved !' in the PLU maintenance when entering PLU text, shorten the PLU text and save it. The maximum value is 500 characters / 20 lines.
What does 'Code structure not defined' mean on Bizerba SC II 400?
If your Bizerba Scales display 'Code structure not defined', it means you are scanning an article with a code digit (e.g. 21....... ) that refers to a code structure number not defined in the 'Data maintenance' / 'Code structures' menu. Correct the code digit or define a code structure to correspond to the code digit in the 'Data maintenance' / 'Code structures' menu.
What to do if Bizerba SC II 400 Scales show 'Operator is not a cashier!'?
If your Bizerba Scales show 'Operator is not a cashier!', and the SC II is operated with the setting 'Configuration' / 'Cash desk' / 'Amount tend./change op.' set to YES, check the settings for the applicable operator in the 'Data maintenance' / 'Operator data' menu.
What to do if Bizerba SC II 400 Scales say 'Please press key'?
If your Bizerba Scales display 'Please press key' when self-service mode is activated, press the button.
What does 'Incorrect check digit' mean on Bizerba Scales?
If your Bizerba Scales display 'Incorrect check digit' when scanning a PLU, check the barcode print format for dot omissions. If the EAN no. was entered manually via the keyboard, check the entry.
What does 'Evaluation active on another scale' mean on Bizerba Scales?
If your Bizerba Scales display 'Evaluation active on another scale' when printing a report, it means the same report has been started on another set of scales. Wait until the report has finished printing out, then restart the report.
What to do if Bizerba SC II 400 say 'Please apply article'?
If your Bizerba Scales display 'Please apply article', it means self-service mode is activated. Place the article on the scale.
What does 'Not in tare range' mean on Bizerba SC II 400?
If your Bizerba Scales show 'Not in tare range' during sales, it means the scales were in an underload range when attempting to tare. To fix this, unload the scales, reset them, and then retry the taring process.
Why is the weight value display not at zero on Bizerba SC II 400 Scales?
If your Bizerba Scales display a weight value that is not at zero or appears modified, it could be due to a few reasons: the load plate may not be correctly positioned, there might be objects on the load plate, or there could be soiling on or beneath the load plate. To fix this: * Clean the load plate. * Position it correctly. * Remove any objects. Also, ensure the scale is leveled properly.
What to do if Bizerba SC II 400 Scales say 'Please log on cashier'?
If your Bizerba Scales show 'Please log on cashier', it means no cashier is logged in within the cash register mode. To resolve this, log on a cashier using the 'Operator log on/off' key. Also, verify the 'Cashier' setting is active for the operator in 'Data maintenance' / 'Operator data'.
General| Max. Load | 6 kg / 15 kg |
|---|---|
| Readability | 1 g / 2 g |
| Display | LCD |
| Power supply | 230 V AC |
| Weighing capacity | 6 kg / 15 kg |
| Material | Stainless steel |
| Interfaces | RS232, Ethernet |
Explanation of danger levels and their meaning in warnings.
Information related to scale verification and legal requirements.
Details on metrology marks, conformity assessment, and trade use in EU countries.
Explanation of verification processes and validity periods for scales.
Lists standards and directives related to measuring technology.
Lists standards related to electromagnetic compatibility (EMC).
Lists standards related to electrical safety.
Important conditions to note before and during device operation.
Details on power supply installation and international specifications.
Instructions and rules for wireless LAN device network usage.
Identifies hazards related to the scale system and safety precautions.
Specifies qualifications and responsibilities for personnel operating the equipment.
Information on putting the device into operation and initial setup.
Instructions on how to switch the device on and its requirements.
Instructions for installing and assembling the scale device.
Customer's responsibility for installing the power supply according to standards.
Crucial checks before connecting the device to the mains power.
Instructions and cautions for making cable connections to the device.
Explanation of basic and extended keyboard functions and configuration.
Instructions on how to power on the scale device.
Procedure for safely switching off the scale device.
Methods for accessing Product Look-Up (PLU) data for articles.
Steps following a PLU call-up.
Procedures for canceling articles before completing a transaction.
Procedures related to tare balancing for various scenarios.
Procedures for tare balancing with known tare values.
Using cash register functions, including pay-in/pay-out.
Handling articles with various price types like graduated or fixed prices.
Handling articles with fixed weight and price.
Using "By count" PLUs for piece articles with saved piece numbers.
Table listing common faults, their causes, and elimination steps.
List of text messages, their causes, and remedies.
General instructions and precautions for cleaning the device.
To Next Page
