60
Note: When the timer has reached the configured
time, the meter will make an audible “beep” sound
continuously for 10 seconds before auto power-off.
To stop the “beep” sound, simply press any button to
resume operation and reset the timer count.
The available timer settings are: 5 minutes, 15
minutes, 30 minutes, 60 minutes, and off.
When the primary display shows “AoFF”, push the
or button to select the timer setting. The
settings will be shown on the secondary display as
follows:
Table 2 - Auto Power-off Options
To Next Page
Loading...
Need help?
General
