BK Precision 878B User Manual

65
display shows “dEF”, either press or
button to change the setting so that the secondary
display shows “yES”. Upon saving and exiting the
utility menu, the instrument will automatically reset
back to its original settings. Below is a table of all the
settings that will be restored.
Table 3 - Instrument Default Settings
Settings
Default Configuration
Primary Function
C (Capacitance)
Secondary Function
None
Measurement Method
SER (Series)
Test Frequency
1 kHz
Beep
On
Auto Power-off
15 (15 minutes)
Power-up State
PrE
Reset Default Settings
No
Note: In the case where under “PuP” option, “SEt” is
selected and “dEF” is set to “yES”, the “PuP” setting
has priority over the “dEF” setting. This means the
instrument will not be set back to default upon saving
and exiting the utility menu. Instead, the power-up
settings will be stored and will be recalled upon the
next power-up of the instrument.

BK Precision 878B Specifications

General

Brand	BK Precision
Model	878B
Category	Measuring Instruments
Language	English