BK Precision 9801 - Page 27

Return Parameter: <NRf>
SWEep:STEP:TIMe
This command is used to edit the sweep time for a single step.
Command syntax：SWEep:STEP:TIMe <NRf>
Parameter 1: MINimum|MAXimum|<NRf>
Parameter unit: ms
Example: SWE:STEP:TIM 2, 60
Query syntax: SWEep:STEP:TIMe?
Return Parameter: <NRf>
SWEep:STARt:FREQuency
This command is used to edit the sweep starting frequency.
Command syntax: SWEep:STARt:FREQuency <NRf>
Parameter: MINimum|MAXimum|<NRf>
Parameter unit: Hz
Example: SWE:STAR:FREQ 50
Query syntax: SWEe:STARt:FREQuency?
Return parameter: <NRf>
SWEep:END:FREQuency
This command is used to edit the sweep ending frequency.
Command syntax：SWEep:END:FREQuency <NRf>
Parameter: MINimum|MAXimum|<NRf>
Parameter unit: Hz
Example: SWE:END:FREQ 100
Query syntax: SWEep:END: FREQuency?
Return Parameter: <NRf>
SWEep:STEP:FREQuency
This command is used to edit the sweep frequency step.
Command syntax：SWEep:STEP:FREQuency <NRf>
Parameter : MINimum|MAXimum|<NRf>
Parameter unit: Hz
Example: SWE:STEP:FREQ 10
Query syntax: SWEep:STEP:FREQuency?
Return Parameter: <NRf>
SWEep:SAVe:BANK
This command is used to save a sweep file into a specified memory location.
Command syntax：SWEep:SAVe:BANK <NR1>
Parameter: 0 ~ 9
Example: SWE:SAV:BANK 0