27
1. 8 7 7. 8 7 7. 2 269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
4.1.4.3 KEEP ALIVE OPTIONS
This feature is used to prevent selected computers from going into sleep mode by emulating activity on the mouse/keyboard. Two
modes are possible:
• Onactivity-Whenchosen,keepaliveactivitiesaresentevery15secondsaslongasthelocalconsoleisinuse.Whenthelocal
console is not in use then no keep alives are sent.
• Always-Whenchosen,keepaliveactivitiesaresentcontinuouslyevery15seconds.
Channels: Place a tick next to each computer that needs to be kept awake.
4.1.4.4 SWITCH IDENTIFICATION
This section allows you to optionally apply Name, Description and Location details to the Freedom II. For larger installations where
multiple units exist, this information can be very useful for identification purposes. Additionally, the Name entry is also used when
performing a DHCP search.
If the Name and Location entries are set, they will be displayed at the top of each Zero Touch Switch Manager page as the Switch ID
(replacing the MAC address).
To Next Page
Loading...
Need help?
General