SERVSWITCH™ BRAND CATX KVM EXTENDER FAMILY
16
2.5 Compatibility
Interface Compatibility
• USB Devices:
Standard keyboards (including certain models with multimedia keys)
Standard wheel mice (including certain models with tilt wheel)
Composite keyboard/mouse devices (e.g. wireless devices & KVM switches)
PS/2 to USB converters
Hubs
Other keyboard/mouse type devices such as bar code scanners
Several devices of the same type may be attached simultaneously
Please contact Technical Support regarding operation with other kinds of HID
device not listed above, such as touch screens, graphics tablets and joysticks.
• Audio: Input and output are line-level: 4V Pk-Pk maximum. Amplified speakers are
required. A microphone may be directly connected to the Remote Unit. Pull-up resistor
provides bias for condenser microphone. Option to set microphone amplification to
+17dB.
• Serial: Transparent up to 19.2K Baud (38.4K operation may be possible with some
devices). The following serial signals are extended: TX, RX, RTS, CTS, DTR, and DSR.
In rare cases, a wiring adaptor may be required to transfer RI and DCD.
• Video: VGA to UXGA. Separate sync, composite sync, or sync-on-green. Maximum
resolution and refresh rates depend on cable length and cable type (see Appendix G:
Specifications, page 54).
Extender Compatibility
Please refer to Troubleshooting & FAQ section, page 37. You may also consult Technical
Support to confirm compatibility with other ServSwitch™ Brand extension and switching
products.
To Next Page
Loading...
Need help?
General