SERVSWITCH™ BRAND CATX KVM EXTENDER FAMILY
36
To transfer descriptors:
1. Enter Command mode
(see page 27).
2. Press the key combination:
<Left Control> + <F4>
The Remote unit will now exit Command mode whilst the Local Unit re-connects as a device
with the transferred descriptors. During this time you will be unable to use USB devices.
Should any problems arise after issuing the command, simply USB hot-plug the Local Unit.
If an HID device requires a special driver, or your keyboard has
multimedia keys that also function as normal keys then it is unlikely to be
fully supported by the extender. Please check with Technical Support
regarding the availability of later firmware releases supporting a wider
range of HID devices.
To Next Page
Loading...
Need help?
General