Blackmagicdesign Blackmagic Web Presenter User Manual

Blackmagic Web Presenter Setup Utility
To update the internal software using Windows:
1 Download and unzip Blackmagic Web Presenter Setup.
2 You should see a Blackmagic Web Presenter Setup folder containing this manual and
the Blackmagic Web Presenter Setup installer. Double click the installer and follow the
onscreen prompts to complete the installation.
3 After installation, connect your Web Presenter to the computer via the USB connector
on the front panel. Lift open the plastic dust cover to access the USB connector.
4 Launch Blackmagic Web Presenter Setup and follow any onscreen prompt to update
the internal software. If no prompt appears, the internal software is up to date and there
is nothing further you need to do.
Download the latest setup utility for your BlackmagicWeb Presenter from the
Blackmagic Design support center at www.blackmagicdesign.com/support
21

Blackmagicdesign Blackmagic Web Presenter Specifications

General

Brand	Blackmagicdesign
Model	Blackmagic Web Presenter
Category	Media Converter
Language	English