Blackmagicdesign SmartView Duo Operation Manual

Installation
14
Hardware: Networking SmartView Duo with an Ethernet network switch
If you want to connect several SmartView Duo units to your studio's existing network, you only need to
connect one SmartView Duo to the network switch. The rest can be daisy-chained to each other so you
don't have to run multiple cables back to a network switch. Power must be supplied to all units.
Network Switch
Ethernet
Client
Computers

Blackmagicdesign SmartView Duo Specifications

General

Brand	Blackmagicdesign
Model	SmartView Duo
Category	Monitor
Language	English