Installation
20
Monitor Settings pane: Brightness, Contrast, Saturation
You can use Blackmagic SmartView Utility to make changes to the brightness, contrast and saturation of the
monitors when connected to the SmartView Duo hardware via Ethernet or USB.
Monitor Settings pane: Adjust both monitors together
When this setting is enabled, any changes made to the brightness, contrast and saturation will be applied
to both SmartView Duo monitors. Yellow borders will surround both monitors in the software interface to
indicate that changes to brightness, contrast and saturation will be applied to both monitors.
Deselect this setting if you wish to make independent changes to the two monitors. Click on Monitor 1 or
Monitor 2 and a yellow border will surround the selected monitor, in the software interface, to indicate that
changes to brightness, contrast and saturation will only be applied to the selected monitor.
You can use Blackmagic SmartView Utility to enable or disable the "Adjust both monitors together" setting
when connected to the SmartView Duo hardware via Ethernet or USB.
Monitor Settings pane: Identify monitor
Enable this setting to display a white border on the selected monitor of the SmartView Duo. If you have
several SmartView Duo units on a network, this setting makes it easy to identify the selected monitor.
The white border will appear both on the LCD monitor and in the Blackmagic SmartView Utility
software interface.
If this setting is used in conjunction with the "Adjust both monitors together" setting, the white border will
be displayed on both monitors.
You can use Blackmagic SmartView Utility to enable or disable the "Identify monitor" setting when
connected to the SmartView Duo hardware via Ethernet or USB.
Monitor settings can be adjusted independently or together
A white border will appear around the selected monitor(s)
in the Blackmagic SmartView Utility, in addition to a yellow
border, when the "Identify monitor" feature is enabled.
A yellow border will appear around the selected monitor(s)
in the Blackmagic SmartView Utility.
A white border will appear around the selected LCD monitor(s) when the "Identify monitor" feature is enabled.
To Next Page
Loading...
Need help?
General
