Blade Inductrix FPV BL BNF Basic - Flight Mode Selection; Choosing Flight Modes

14
EN
Flight Mode Selection
Cycle between the ight modes by changing the position of the ight
mode switch as programmed in the binding section above. The active
ight mode is indicated by the LED taillight on the quadcopter*.
•Safe mode (blue LED, switch position 0): The bank angle is
limited. When the sticks are released, the quadcopter will return to
level ight.
•Horizon Mode (magenta LED, switch position 1): Keeps the
aircraft level when there are no inputs, but allows ips and rolls when
the stick is at full deection.
•AS3X mode (red LED, switch position 2): The quadcopter has
no bank angle limits and will not return to level ght if the sticks are
released. Use rates and expo to tune the performance according to
your ying style.
* The LED taillight only indicates the active ight mode continuously if
the color mode of the LED has not been changed. See Changing the
LED Taillight Color for more information.