Blade Inductrix FPV BL BNF Basic - First Flight Preparation; Pre-Flight Setup Steps; Flying Checklist

7
EN
First Flight Preparation
•Remove and inspect contents
•Begin charging the ight battery
•Assemble the aircraft
•Program your computer transmitter
•Install the ight battery in the aircraft (once it has been fully charged)
•Bind your transmitter
•Familiarize yourself with the controls
•Find a suitable area for ying
Flying Checklist
❏ Always turn the transmitter on first
❏ Plug the ight battery into the lead from the ESC
❏ Allow the ESC to initialize and arm properly
❏ Fly the model
❏ Land the model
❏ Unplug the ight battery from the ESC
❏ Always turn the transmitter off last