24
User Settings: Program 8
Users are free to edit the values in the order of TIME, DISTANCE, CAL, and the level of
loading in 10 intervals. e values and proles will be stored in the memory after setup.
Users may also change the ongoing loading in each interval by turning the nut, and they will
not change the level of loading stored in the memory.
Speed Independent Program: Watt Control
Program 9 is a Speed Independent Program. Press the "ENTER" key to select the values
of TIME, DISTANCE, and WATT. en, Press "UP(+)" or "DOWN(-)" to adjust the
values. After pressing the "START" key to exercise, please also apply the heart rate detector
appropriately. During the exercise, the level of loading is not adjustable. In this program,
the computer will adjust the level of loading according to the value of WATT setup. For
example, the level of loading may increase while the speed is too slow. Also, the level of
loading may decrease while the speed is too fast. As a result, the calculated value of WATT
will be close to the value of WATT set by users.
Program 6 (Mountain) Program 7 (Intervals)
Program 8 (User Settings)
Program 9 (Watt Control)
To Next Page
Loading...
