PROGRAMMING THE OVEN
The figure shows the keys, the pilot lights for all the functions and the programmer display.
(1) Setting and displaying the
minute counter - Timer
(2) Setting and displaying the
cooking time - Timer
(3) Setting and displaying the
end of the cooking time
(4) Manual operation
(5) Setting the times -
Decrease
(6) Setting the times - Increase
Indicator Lights for the Time Functions
When the indicator lights are on the appliance is operating, as follows.
General operation
Automatic programme
Minute minder
Setting the Timer
Once the electronic connection is complete and power is applied, the display blinks and shows
0.00.
To set the time of day
Press keys (1) and (2) at the same, and set the actual time, by pressing keys (-) and (+) within 4
seconds. The oven remains in manual operation and can be used without any programming.
Important Information
• Between 22.00 hrs and 6.00 hrs the display intensity is automatically dimmed.
• If the acoustic signal is not disconnected (as per subsequent instructions), it cuts off after 2
minutes.
INSTRUCTIONS FOR USE
A
U
T
O
1234
5
6
141 blanco 17-02-2004 10:55 Pagina 8
A
U
T
O
12
To Next Page
Loading...
Need help?
General
