INSTRUCTIONS FOR USE
• Any programming described below is activated after approximately 4 seconds from the pre-
setting.
• 23 hrs and 59 minutes is the maximum programmed time. Any and all programmed settings
are erased when there is a power cut or supply failure. When power is restored the display fla-
shes and shows 0.00. To reset the programmer set both the actual time and the programme
again.
Automatic Operation
The oven can be programmed to switch on and off automatically.
To do this proceed as follows:
1. Select the required cooking function and temperature using the function selector and the ther-
mostat dial.
2. Press key (2) and set the cooking time by pressing keys (-) and (+) within the next 4 seconds
3. Press key (3) and set the end of the cooking time in the same way.
The actual time reappears and pilot light (AUTO) remains ON, when the cooking process
starts, pilot light (A) will remain on. The cooking time left can be controlled by pressing key
(2), or the time can be changed by repeating the same procedure.
Reset the cooking time to 0.00 to erase the preset programme, and when the actual time
reappears, press key (4) to reset the manual function. Once the cooking process is over
the acoustic signal goes off and the oven automatically switched off. Press one of the keys
from (1) to (4) to return the programmer to the manual function.
Semi-automatic Operation (Setting the end of cooking time)
The oven can be programmed to switch off automatically.
To do this proceed as follows:
1. Select the required function and temperature using the cooking function selector and
the thermostat dial.
2. Press key (2) and set the cooking time by pressing keys (-) and (+) within the next 4
seconds. The actual time reappears and pilot lights (A) and (AUTO) remain ON.
The cooking time left can be checked by pressing key (2), or the time can be changed by
repeating the same procedure.
To erase the pre-set programme, reset the cooking time to 0.00, when the actual time
reappears, press key (4) to reset to manual function.
Once the cooking programme is complete, the acoustic signal will sound and the oven is
automatically switched off. Press one of the keys from (1) to (4) to switch off the acoustic
signal. Press key (4) to return the programmer to the manual function.
141 blanco 17-02-2004 10:55 Pagina 9
13
To Next Page
Loading...
Need help?
General
