38
Traffic information
reception
Your radio unit is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Every time a traffic announcement (TA)
is transmitted, you will automatically be
switched from a station that does not
provide traffic information to a station
within the broadcasting network that
does.
Once the traffic information message is
over, you will be switched back to the
programme that you were listening to
before.
Switching traffic information
priority on/off
➮ Press the TRAF button >.
Traffic announcement priority is active
when a traffic jam symbol lights up in
the display.
Note:
You will hear a warning sound
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if, while listening to a cassette, a
CD or an AUX source, you leave
the reception area of a traffic infor-
mation station that you are tuned
into and the subsequent automatic
search cannot find a new traffic in-
formation station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
TRAFFIC INFORMATION RECEPTION
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the traffic
announcement volume
➮ Press the MENU button <.
➮ Keep pressing the or button
; until “TAVOLUME” appears in
the display.
➮ Set the volume using the and
buttons ;.
When you have finished making your
changes,
➮ press the MENU button < twice.
Note:
● You can also adjust the volume
during a traffic announcement for
the duration of the announcement
by using the volume control ?.
To Next Page
Loading...
Need help?
Amplifier
