Blaupunkt Canberra C31 User Manual

31
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Adjusting the volume
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
To increase the system volume,
➮ press the button ?.
To decrease the system volume,
➮ press the button ?.
Setting the power-on volume
You can set the unit's default power-on
volume.
➮ Press the MENU button <.
➮ Keep pressing the or button
; until “ON VOL” appears in the
display.
➮ Set the power-on volume using the
and buttons ;.
To help you adjust the volume more
easily, the volume will be increased /
decreased as you make your changes.
If you change the setting to “0”, the pow-
er-on volume will be the same as the
volume level that was set before the unit
was last switched off.
Note:
● To protect your hearing, the power-
on volume is limited to a value of
“38”. If the volume level was higher
when the unit was switched off, the
volume will be reset to “38” when
the unit is switched on again.
When you have finished making your
changes,
➮ press the MENU button < twice.
Instantaneous volume reduction
(mute)
This feature allows you to instantane-
ously reduce (mute) the volume to a lev-
el preset by you.
➮ Briefly press button @.
“MUTE” appears in the display.
Setting the mute level
You can set the unit’s mute volume lev-
el.
➮ Press the MENU button <.
➮ Keep pressing the or button
; until “MUTE LVL” appears in the
display.
➮ Set the mute level using the and
buttons ;.
When you have finished making your
changes,
➮ press the MENU button <.
Telephone audio / navigation
audio
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will then
be heard over the car radio loudspeak-
ers. In order for this to work, the mobile
telephone or navigation system must be
connected to the car radio in the man-
ner described in the installation instruc-
tions.
ADJUSTING THE VOLUME

Blaupunkt Canberra C31 Specifications

Amplifier

output power sine	4 x 25 watts
output power max	4 x 45 watts
voltage	14.4 V

Tuner

FM frequency range	87.5 - 108 MHz
MW frequency range	531 - 1, 602 kHz
LW frequency range	153 - 279 kHz

Frequency Response

FM frequency response	35 - 16, 000 Hz
cassette frequency response	30 - 18, 000 Hz

Inputs and Outputs

pre-amp out channels	4 channels
pre-amp out voltage	3 V
AUX input sensitivity	2 V / 6 kΩ
Tel./Navi input sensitivity	10 V / 1 kΩ