Blaupunkt Canberra C31 User Manual

43
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Pausing playback (PAUSE)
➮ Press button 2 ( ) =.
“PAUSE” appears in the display.
Cancelling pause
➮ Press button 2 ( ) = while in
pause mode.
Playback is continued.
Changing the display
To switch between the track number /
CD number display and the track
number / playing time display,
➮ press the MENU button <.
➮ Keep pressing the or button
; until “CDC DISP” appears in the
display.
➮ Press the button ;.
The current setting is displayed. “TIME”
for the playing time display and “CD NO”
for the CD number display.
➮ Press the button ; to select the
required setting.
➮ Press the MENU button < twice.
CLOCK - Time
Briefly displaying the time
To display the time,
➮ keep the MENU ( ) button <
pressed until the time appears.
Setting the time
Setting the time manually
To set the time,
➮ press the MENU button <.
➮ Keep pressing the or button
; until “CLOCKSET” appears in
the display.
➮ Press the button ;.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮ Adjust the minutes using the
buttons ;.
Once you have set the minutes,
➮ press the button ;.
The hours flash on and off.
➮ Adjust the hours using the
buttons ;.
When you have finished making your
changes,
➮ press the MENU button < twice.
CLOCK - TIMECD CHANGER MODE

Blaupunkt Canberra C31 Specifications

Amplifier

output power sine	4 x 25 watts
output power max	4 x 45 watts
voltage	14.4 V

Tuner

FM frequency range	87.5 - 108 MHz
MW frequency range	531 - 1, 602 kHz
LW frequency range	153 - 279 kHz

Frequency Response

FM frequency response	35 - 16, 000 Hz
cassette frequency response	30 - 18, 000 Hz

Inputs and Outputs

pre-amp out channels	4 channels
pre-amp out voltage	3 V
AUX input sensitivity	2 V / 6 kΩ
Tel./Navi input sensitivity	10 V / 1 kΩ