41
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Switching blankskip on/off
➮ Press the MENU button <.
➮ Keep pressing the or button
; until “BLK SKIP” appears in the
display.
➮ Press the or button ; to
switch blankskip on/off.
When you have finished making your
changes,
➮ press the MENU button <.
Selecting the tape type
If you play a “metal” or “CrO
2
” tape type,
you should set the tape type to “MTL
ON”.
To select the tape type,
➮ press button 1 (MTL) =.
“MTL ON” or “MTL OFF” appears brief-
ly in the display.
Dolby* B noise suppression
If you play cassettes that were record-
ed using the Dolby B process, you
should switch on the Dolby feature.
➮ Press button 5 ( ) =.
If the Dolby feature is activated,
lights
up in the display.
* Noise suppression system manufactured under license
from Dolby Laboratories. The word “Dolby” and the dou-
ble-D symbol are trademarks of Dolby Laboratories.
CD changer mode
Note:
● Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
Switching to CD changer mode
➮ Keep pressing the CD•C button 9
until “CHANGER” appears in the
display.
Playback begins with the first CD that
the CD changer detects.
Selecting a CD
To move up/down from one CD to an-
other,
➮ press the or button ; once or
several times.
Selecting tracks
To move up/down from one track to an-
other on the current CD,
➮ press the or button ; once or
several times.
Quick track selection
To quickly select tracks backwards or
forwards,
➮ keep one of the / buttons ;
pressed until fast reverse / forward
track selection begins.
CD CHANGER MODECASSETTE MODE
To Next Page
Loading...
Need help?
Amplifier
