Blaupunkt Canberra C31 User Manual

46
X-BASS
The X-BASS feature can be used to
boost the bass at low volume levels.
Note:
● You can adjust the X-bass settings
separately for each audio source
(radio, cassette, CD changer and
AUX).
Adjusting the X-BASS boost
settings
The X-BASS boost can be set in steps
ranging from 1 to 3.
“X-BASS OFF” means that the X-BASS
feature is switched off.
➮ Press the X-BASS button 8.
➮ Keep pressing the / or /
button ; until the required setting
appears in the display.
If the X-BASS boost is set to a value of
1, 2 or 3, the X-BASS symbol appears
in the display.
When you have finished making your
changes,
➮ press the X-BASS button 8.
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. The audio
source, for example, can be a portable
CD player, MiniDisc player or MP3 play-
er.
The AUX input must be activated in the
menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this adapter cable
from your authorised Blaupunkt dealer.
Switching the AUX input on/off
➮ Press the MENU button <.
“MENU” appears in the display.
➮ Keep pressing the or button
; until “AUX OFF” or “AUX ON”
appears in the display.
➮ Press the or button ; to
switch AUX on/off.
When you have finished making your
changes,
➮ press the MENU button <.
Note:
● If the AUX input is switched on it
can be selected by pressing the
CD•C button 9.
X-BASS EXTERNAL AUDIO SOURCES

Blaupunkt Canberra C31 Specifications

Amplifier

output power sine	4 x 25 watts
output power max	4 x 45 watts
voltage	14.4 V

Tuner

FM frequency range	87.5 - 108 MHz
MW frequency range	531 - 1, 602 kHz
LW frequency range	153 - 279 kHz

Frequency Response

FM frequency response	35 - 16, 000 Hz
cassette frequency response	30 - 18, 000 Hz

Inputs and Outputs

pre-amp out channels	4 channels
pre-amp out voltage	3 V
AUX input sensitivity	2 V / 6 kΩ
Tel./Navi input sensitivity	10 V / 1 kΩ