Blaupunkt Melbourne C30 User Manual

17
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Adjusting the tone and
balance/fader
Adjusting the bass
➮ To adjust the bass, press AUD /
LD =.
“BASS” will appear in the display.
➮ Press or : to alter the bass.
Adjusting the treble
➮ To adjust the treble, press AUD /
LD =.
“BASS” will appear in the display.
➮ Press : until “TREBLE” ap-
pears in the display.
➮ Press or : to alter the treble.
Adjusting the balance
➮ To adjust the balance, press AUD /
LD =.
“BASS” will appear in the display.
➮ Press : until “BALANCE” ap-
pears in the display.
➮ Press or : to alter the bal-
ance.
Adjusting the fader
➮ To adjust the fader, press AUD /
LD =.
“BASS” will appear in the display.
➮ Press : until “FADER” appears
in the display.
➮ Press or : to alter the fader.
Switching Loudness on/off
Loudness boosts the bass and treble
when the volume is low to create a more
natural sound.
➮ Press AUD / LD = for approx. two
seconds.
LD will light up in the display to indicate
that Loudness is active.
Adjusting Loudness intensity
The Loudness boost can be set in
stages from one to six.
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until
“LOUDNESS” appears in the dis-
play.
➮ Press or : to alter the Loud-
ness setting.
➮ Once you have completed adjust-
ing the settings, press MENU 8 or
OK ;.
TONE AND BALANCE/FADER

Blaupunkt Melbourne C30 Specifications

General

Brand	Blaupunkt
Model	Melbourne C30
Category	Car Receiver
Language	English