52
The storing procedure begins. "FM
TRAVELSTORE" appears on the display.
After the process has completed, the radio
will play the station that is stored in memory
location 1 of the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 6
;.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all
the receivable stations briefl y. You can set
the scanning time in the menu to between
5 and 30 seconds.
Starting SCAN
Press and hold down the MENU button
9 for longer than two seconds.
Scanning begins.
"SCAN" appears briefl y on the display fol-
lowed by a fl ashing display of the current
station name or frequency.
Cancelling the SCAN and continuing to
listen to a station
Press the MENU button 9.
Scanning stops and the radio continues
playing the station that it tuned into last.
쏅
쏅
쏅
쏅
Setting the scanning time
Press the MENU button 9.
Press the
or button : repeatedly
until "VARIOUS MENU" appears on the
display.
Press the
button : to open the
menu.
Press the
or button : repeat-
edly until "SCAN TIME" appears on the
display.
Set the desired scan time with the
or
button :.
When you have fi nished making your chang-
es,
press the MENU button 9 three
times.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
For example, the programme types can be:
CULTURE TRAVEL JAZZ
SPORT SERVICE POP
ROCK KNOWLEDGE KIDS
You can use the PTY function to select sta-
tions of a particular programme type.
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
02OrlandoMP46_gb.indd 5202OrlandoMP46_gb.indd 52 01.03.2006 15:45:54 Uhr01.03.2006 15:45:54 Uhr
To Next Page
Loading...
Need help?
General
